SciBlogs

Posts Tagged satellite TV over fibre

FTTH Conferences – a brilliant route to synergies John Nixon Jun 03

1 Comment

john at ftth seoulRecently, I attended the FTTH Council Asia-Pacific 2010 Conference in Seoul, Korea.

This event was held over the last few days in the gigantic COEX Convention Centre in downtown Seoul.

Attendees were naturally a bit on edge over the escalating tensions between North and South following the torpedoing of a South Korean patrol boat and the loss of 46 mariners’ lives.

The conference and trade show for my part were extremely successful. I helped out on the BKtel stand with my friend and colleague Siegbert Mundinger who manages sales at their German headquarters.

I was expecting most attendees to be from Asia, so I was surprised to have so many Australians and New Zealanders call by the booth. On both sides of us were French companies displaying impressive equipment and solutions for trenching and laying/pulling fibre. I finally met up with my long-time email correspondent Benoit Felten, the principal analyst with Yankee Group in France, a really fun guy.

There is no doubt that the networking opportunities of these conferences are priceless. Having so many people together who share a common profession, interest and passion gives rise to excellent synergy.

My presentation on “Satellite TV over Fibre” was well attended and received. There is no doubt that ultra broadband video overlay on the “third wavelength” (1550 nm) is a wonderfully performant complement to IPTV, particularly since we can now add and transport satellite L-band QPSK signals without any modification.

Unloading potentially several Gbps per subscriber from the data link can radically diminish the delivery and backbone load, and thus reduce the CAPEX investment in a given network. The cost of implementing the third wavelength for TV (and digital radio) distribution over FTTH is minimal.

The FTTH Asia-Pacific Council AGM was held yesterday (Friday) and the coming year’s Board of Directors and office-bearers elected.

I was honored to be elected as vice-chair of the Technology and Architecture study group.

There is certainly lots to do in this arena as new FTTH technology and standards leap ahead.

Excellent thoughts on Aussie NBN John Nixon Nov 06

1 Comment

Tonight Google threw me this article, written only a few hours ago. I found it very logic and sensible. Who is Tom Worthington? Well as I found out, a pretty savvy and successful technical academic in Canberra. According to his website, he looks like this:
tomwtn1b
I tried to find a contact or email address on his website: nothing! So Tom, if you read this, don’t sue me for not asking authority to reproduce! Only one major criticism, no details on the delivery of TV. Just one vague mention about IPTV. It amazes me that nobody seems to know anything about the “3rd wavelength” for TV Broadcasting. Just pull TV off the data link. It doesn’t need to be there. In any case Foxtel, Austar and Sky TV aren’t at all ready to deliver anything over IPTV. Even if they were, why dump TV on the data link when you don’t have to?
Here we go, otherwise very sensible words to my mind! Particularly about level 1 and 2 services.

Friday, November 06, 2009
Designing the National Broadband Network
The Australian Telecommunications Users Group (ATUG) held a National Broadband Network Reference Model Forum in Sydney this morning (there will be another in Melbourne on 12 November 2009). Based on the morning’s discussion, my view is that a simpler internet model be used in place of the Communications Alliance model. This will be technically simpler to implement and will also avoid many difficult regulatory issues with telephone and broadcast services. In essence the NBN will be “an internet”, which will be part of “the Internet”. The NBN can carry many different services using internet protocols, including services which emulate the plain old telephone service (POTS), cable TV and broadcast TV, without being limited to only providing those services or providers.

Paul Brooks, Lead Consultant, NBN Project of Communications Alliance gave a detailed overview of the Communications Alliance High Level Architecture Options for the NBN in detail. His view is that it is likely that the NBN will use a passive optical network for Fibre to The Home (FTTH). This will provide considerable bandwidth to the home, but it is not clear how far this will extend through the network.

While NBN will own and install the connections to the home, there is no architectural distinction between NBN and non-NBN back end networks. The Communications Alliance model operates at level 2 . It is likely that IPv6 will be used or services such as VoIP at the higher layers of the model. Issues to be resolved include how many points should other providers be able to connect at (options range from 5 to 500).

At the home termination, it is not clear how the consumer will connect. Options range from a socket to which any equipment can be connected to an NBN supplied set top box. One issue which I raised early on the the NBN process was the need for operations in disasters during mains power failure. This seems to have been taken up with discussion of who provides the backup batteries.

Stepping back from the details, Paul Brooks pointed out a principle should be customer choice. Each service may be connected to different devices from different suppliers ad networks. The example given was a smart electricity meter provided by the energy company, which the householder has little control of but still has to have working over the NBN.

It occurs to me that in all this some points have been lost:

1. Its the Internet: The primary purpose for the NBN is to provide access to the Internet. It is likely the system will be implemented using internet protocols. The simplest way to provide Internet access via an internet network is with internet protocols. Therefore the the NBN should be designed as an internet. Much of the Communications Alliance model discussion seems to be about old fashioned connection based network design which is not needed and not relevant for an internet.
2. Layers aren’t real: While there s much discussion of Layer 1 and Layer 2, these are abstractions and so of little use for practical decision making. In the discussion it does not seem to be made clear even which multi-layer model is being discussed (the ISO OS model has seven layers, whereas IP has only five).

Peter Hitchiner, Australian Computer Society – Telecommunications Society of Australia, gave a more general overview as to what the NBN should do (similar to the ACS talk I gave to ATUG in Canberra). He pointed out that the nature of the NBN service is not clear, in particular is “layer 2″ access the preferred industry approach. A major question is will IPTV services be treated equally (a major policy question for the Federal Government).

At this point the forum moved into a discussion to explore some of these issues. This proved very interesting and useful. On the access issue Paul Brooks mentioned that the home access box might have four ports (presumably Ethernet copper cable ports), plus possibly a telephone and a TV port. It seemed that he envisioned each port would provide a distinct “service” from a separate “service provider”. In the subsequent discussion it became clear that the model the Communications Alliance’s proposing is to emulate a point to point service over the NBN, on top of an underlying IP network.

Stephen Wright, from Gibson Quai-AAS – Telecommunications Consultants (GQAAS) then talked about the network resilience required. Telstra provides about 99.90% reliability for telephony services (PSTN). Stephen suggested we should aim for 99.95% or higher for the NBN. My view is that it should be relatively simple and inexpensive to achieve this level of service for the NBN for telephony services. This assumes that the NBN is configured to provide different levels of reliability for different services, with emergency services having priority. As an example, the household is likely to want enough bandwidth to call an ambulance in an emergency, and will accept that this should take priority over being able to watch TV. With the NBN configured to provide enough bandwidth to provide TV most of the time, there should be enough capacity to handle lower bandwidth services, such as telephony almost all the time.

The Communications Alliance proposed model is not a good one, is not in the public interest and should not be adopted. Its complexity comes from trying to reproduce the restrictions of the old telecommunications system in order to support old business models. Instead I suggest accepting that the NBN will provide an Internet service. The model then becomes very much simpler, with an unlimited number of service providers able to provide services to the home over one Internet connection. Where a service provider needs a high level of security for their service, for example a telephone, smart meter or a TV set top box, they would need to ensure that the software or hardware they provide to the home has the needed security built in. There is then no need to worry about how many ports to provide or what types. Only one port is needed which can support all the services required.

This would be similar to the electrical sockets provided in the home. These are all wired in parallel and provide the same service. The householder can purchase their own devices to plug in. The householder can also purchase multiple adaptors to plug in. If the householder wants to plug in a refrigerator from a particular supplier, they do not need a special power point installed which only provides one brand of electricity.

The NBN will likely replace the current telephone, broadcast TV and cable TV services. I suggest replacements for these services be done in a way which does not limit the availability of new services. This would be a change in the previous government practice which has been to protect encumbent providers from competition from new services. As an example, the conversion to digital TV in Australia was designed so that the existing analog TV stations retained their oligopoly, even though the new digital technology did not require this.

There is a case for providing telephony and TV as part of the basic NBN service, but architecturally these can be simply services on top of the Internet. In this way the household will not be locked into a new monopoly unnecessarily. As an example, the householder would be able to pay a service provider to provide an ordinary telephone POTS type service from an Australian telecommunications provider. But the householder should be able to use the same NBN equipment to make free Internet calls and to sign up with several other telephone providers, including companies located anywhere in the world, if they wish.

Similarly, the house holder could use the NBN to watch Australian free to air TV and cable TV. However, the householder should be able to also access any other TV-like service available over the Internet from anywhere in the world. The fact that Foxtel might wish to provide a restricted pay TV service using NBN, should not stop other provision of TV like services for free by others.

The issues of telephony on the NBN are not technically complex, compared to the regulatory and public policy issues. TV type services over the NBN are slightly more complex technically, but are dwarfed by the complexity of the public policy issues. There is not sufficient time to work through all of the sectional interests involved in time to implement the NBN. With the current timetable, Australian will still not have transitioned completely from analogue to digital before it will be time to start replacing the digital TV broadcast service with the NBN.

I suggest the Australian Government take the opportunity to short circuit the process by setting some simple goals for the NBN in delivering services over an internet and then let the NBN company get on with the implementation. The NBN is not building a telephone network, nor a pay TV network, it is building a network which can be used for carrying such services.
Labels: ICT Policy, NBN, Telecommunications
posted by Tom Worthington at 1:11 PM

KANZ 09 (Korea-Australia-New Zealand) Broadband Summit. John Nixon Nov 03

No Comments

Tonight I spent a couple of enjoyable hours at the KANZ Welcome Party (Thanks Kordia).
Serious business starts early tomorrow at the SKY Convention Centre.
But I met some very interesting people who had paid good money (well most had..) to be there.
First encounter was with the very newly appointed Chairman of the SOE ‘Crown Fibre Holdings”, Simon Allen.
CFH is somewhat similar to the Australian NBN Co.
Simon is a very calm, genuine, down-to-earth chap who has had a great career in both New Zealand and Australia, I would say he will be a very good man at the helm.

Then I met several people who quite surprisingly were involved with video production, e-learning via video, interactive video training for sports and commerce etc…
Conversation was convivial and constructive. I asked our video-centric people how they thought that their media would be delivered over fibre. They didn’t have a clue (don’t blame them).
I asked whether their media productions were in SD (standard definition) or in HD (high definition). The answer was always “HD”. In fact anybody who buys a new video camera today will probably choose “HD” standard.
I also asked if they know what bandwidth a HD video signal required to be sent as IP video over fibre. Again, no clue.

We know that video will be the BIG bandwidth hog in coming years, because we don’t only have HD, we now have 3D banging on the door. (Even tons more bandwidth required).
So EVEN if we have much higher bandwidth internet over fibre, video of all kinds will be a hog on the fibre data link.

So I get back to my gospel on the “third wavelength”. Nobody, at least here in New Zealand, seems to know about the widely-used option of transmitting broadcast TV and Radio over this 1550 nm third wavelength. You simply inject a third “carrier” wavelength on to the normal fibre which offloads all the Free-to-Air, and Satellite (SKY TV…) programming from the data channel.
You pick off that “channel” at the house end and send the TV/Radio around the home in perfect digital quality. And you offload the equivalent of some 5-10 Gbps of traffic from the data link.
New housing estates, high-rise buildings etc forbid individual antennas. How could you imagine a whole new housing estate that did not allow subscription to SKY TV?

So let’s start talking about the “3rd wavelength” for FTTH!